Description

PV1-F 10mm² Single Solar Cable 100 Meter C.Divine

Reliable 10mm² Solar Cable for Solar Power Systems

The C.Divine PV1-F 10mm² Single Solar Cable 100 Meter is a heavy-duty photovoltaic cable designed for reliable electrical connection in solar power installations. It is suitable for connecting solar panels to combiner boxes, DC isolators, MPPT solar charge controllers, hybrid solar inverters, and other DC components within a photovoltaic system.

With a 10mm² cross-sectional conductor, this solar cable is suitable for applications where higher current-carrying capacity and reduced voltage drop are required compared with smaller solar cable sizes. PV1-F 10mm² cables are commonly manufactured with flexible tinned copper conductors and insulation designed for demanding outdoor photovoltaic environments.

The 100-meter roll provides sufficient cable length for many residential, commercial, agricultural, and off-grid solar installations, reducing the need for frequent cable joints.

Key Features of C.Divine PV1-F 10mm² Solar Cable

• Cable Size: 10mm²
• Core: Single core
• Cable Type: PV1-F photovoltaic solar cable
• Length: 100 meters
• Application: Solar PV and DC electrical installations
• Conductor: Flexible stranded conductor
• Suitable for: Solar panels, solar inverters, MPPT controllers and DC equipment
• Outdoor and indoor installation: Suitable when installed according to the applicable electrical requirements
• Flexible construction: Makes routing and installation easier
• Designed for photovoltaic applications: Suitable for solar-system DC connections
• Available for professional solar installations: Residential, commercial, industrial and agricultural projects

PV1-F solar cables are specifically designed for photovoltaic applications and commonly use tinned copper conductors with cross-linked insulation and jacketing. Typical PV1-F specifications include high DC voltage capability and resistance to demanding environmental conditions.

Why Choose 10mm² Solar Cable?

Choosing the correct solar cable size is important for maintaining efficient power transmission and controlling voltage drop. A 10mm² solar cable provides a larger conductor cross-section than 4mm² or 6mm² cables, making it useful for solar installations with higher current requirements or longer cable runs.

The actual cable size required should always be determined from the solar array current, cable length, installation conditions, permissible voltage drop, ambient temperature, grouping and applicable electrical standards. Do not select cable size based on solar panel wattage alone.

For example, published technical specifications for 10mm² PV1-F cable show DC resistance values around 1.84–2.12 Ω/km, depending on the specific cable construction and manufacturer.

Applications

The C.Divine PV1-F 10mm² Single Solar Cable can be used for a wide range of photovoltaic applications, including:

Solar Panel Connections

Use suitable PV cable to connect solar panels within a PV array and carry DC electricity between photovoltaic modules and other system components.

Solar Inverter Installation

The cable can be used for appropriate DC-side connections between solar panel arrays and compatible solar hybrid or off-grid inverters, subject to the inverter manufacturer’s specifications.

MPPT Solar Charge Controller Systems

It is suitable for appropriately sized DC connections between solar panels, combiner equipment and MPPT solar charge controllers.

Off-Grid Solar Systems

The cable is suitable for residential and commercial off-grid solar installations where properly sized PV wiring is required.

Commercial and Industrial Solar Projects

10mm² PV cable can be useful in larger photovoltaic installations where current capacity, cable distance and voltage-drop calculations require a larger conductor.

Solar Water Pump Systems

It can also be considered for suitable DC-side wiring in solar water-pumping installations, provided the cable is correctly sized for the pump controller, PV array and installation conditions.

Built for Solar Installation Environments

Solar cables are exposed to conditions that ordinary electrical cables may not be designed to handle. PV1-F cable constructions are intended specifically for photovoltaic applications and can feature insulation systems designed to withstand UV exposure, temperature variation and outdoor installation conditions. Typical PV1-F specifications list operating temperature ranges extending from approximately -40°C to +90°C, depending on the cable construction.

Some PV1-F 10mm² specifications also use tinned copper conductors and XLPE/XLPO-type insulation and jacketing, providing flexibility and protection for solar-system wiring.

100 Meter Roll for Convenient Installation

The 100-meter length makes this C.Divine solar cable convenient for solar installers, electricians, renewable-energy contractors and DIY solar projects.

Instead of purchasing short individual cable lengths, a 100m roll allows installers to cut the cable according to the requirements of each section of the installation. PV1-F 10mm² solar cables are also commonly supplied in 100m rolls.

For installations requiring positive and negative DC conductors, remember that a single-core 100m roll provides 100m of cable, not 100m of complete positive-and-negative circuit length. The total cable requirement should therefore be calculated according to the actual routing distance and system design.

Suitable for Nigerian Solar Installations

For solar installations in Nigeria, quality DC cabling is an important part of the overall system design. Solar panels operate outdoors for many years, so the PV cable should be appropriately rated for the electrical and environmental conditions of the installation.

The C.Divine PV1-F 10mm² Single Solar Cable is a practical option for solar installers working on:

• Homes and residential buildings
• Offices and commercial buildings
• Shops and supermarkets
• Farms and agricultural projects
• Solar water pumping systems
• Telecom and backup power installations
• Schools and institutions
• Hotels and hospitality facilities
• Factories and industrial facilities
• Off-grid and hybrid solar systems
• Solar mini-grid projects

Installation Recommendations

For safe and efficient installation, use the cable according to its technical rating and the requirements of the complete solar system.

Professional installers should consider:

1. Maximum operating current
2. Cable run length
3. Voltage drop
4. PV array voltage
5. Ambient temperature
6. Cable grouping
7. Installation method
8. Connector compatibility
9. DC isolator and protection requirements
10. Applicable electrical standards

PV connectors, terminals, isolators and other components should be properly matched to the cable size and system voltage. Correct polarity should also be maintained throughout the DC installation.

Benefits of C.Divine PV1-F 10mm² Solar Cable

Efficient Power Transmission:
The 10mm² conductor provides a substantial cross-sectional area for carrying current in appropriately designed PV circuits.

Flexible Installation:
Stranded photovoltaic cable construction makes routing around solar panels and equipment easier than using rigid conductors.

Designed for Solar Applications:
PV1-F is a photovoltaic cable designation specifically associated with solar-system wiring.

Long 100m Length:
A 100-meter roll is convenient for installers handling multiple cable runs.

Suitable for Outdoor Solar Projects:
PV cable constructions are designed to withstand the environmental conditions normally encountered in photovoltaic installations.

Versatile Application:
Suitable for appropriately designed connections involving solar panels, MPPT controllers, hybrid inverters and other photovoltaic equipment.

Buy C.Divine PV1-F 10mm² Solar Cable 100m in Nigeria

If you are looking for a 10mm² solar cable in Nigeria, the C.Divine PV1-F 10mm² Single Solar Cable 100 Meter is a practical choice for solar installers, electricians, renewable-energy contractors and customers building residential, commercial or off-grid solar systems.

It is suitable for applications where properly sized photovoltaic DC cable is required between solar-system components. Before purchasing, confirm the required cable size with your solar installer or electrical engineer based on the complete system design.

Whether you are installing solar panels, a hybrid solar inverter, an off-grid solar system, an MPPT solar charge controller, solar batteries or a solar water pumping system, using correctly sized PV cable is essential for a properly engineered installation.

Product Specifications

Specification	Details	Brand	C.Divine	Product Type	Solar PV Cable	Model/Type	PV1-F	Cable Size	10mm²	Core	Single Core	Length	100 Meter	Application	Photovoltaic Solar Systems	Installation	Indoor / Outdoor, subject to installation requirements	Conductor	Stranded conductor	Primary Use	Solar DC Connections	Suitable Systems	On-Grid, Off-Grid & Hybrid Solar Systems