Description

50mm² X 4Core Armoured Cable 600/1000V XLPE SWA PVC CU Power Cable – C.Divine

 

50mm² X 4Core Armoured Cable – C.Divine

The 50mm² X 4Core Armoured Cable 600/1000V XLPE SWA PVC CU Power Cable – C.Divine is designed for fixed electrical installations where a larger four-core copper conductor and additional mechanical protection are required.

The cable combines four major components:

• 50mm² copper conductors
• XLPE insulation
• Steel Wire Armour (SWA)
• PVC outer sheath

This construction makes the cable suitable for appropriately engineered low-voltage power-distribution systems across commercial, industrial, construction, infrastructure, generator, and estate projects.

The 50mm² X 4Core configuration provides four individual insulated conductors, each with a nominal cross-sectional area of 50mm². The larger conductor size makes it suitable for electrical applications requiring a larger conductor than smaller 4mm², 6mm², 25mm², and 35mm² cables, subject to proper cable-sizing calculations.

For Nigerian customers searching Google for 50mm² 4 Core Armoured Cable, 50mm² SWA Cable, 50mm² XLPE Copper Cable, 600/1000V Armoured Power Cable, or where to buy original armoured cable in Lagos Nigeria, C.Divine is a suitable product option to consider.

50mm² 4-Core Copper Power Cable

The 50mm² X 4Core designation indicates four conductors, with each conductor having a nominal cross-sectional area of 50mm².

The use of CU (copper) conductors provides good electrical conductivity and makes this cable suitable for appropriately designed power-distribution applications.

Copper is widely used in electrical power cables because of its electrical conductivity, mechanical properties, and established application in electrical infrastructure.

A 50mm² conductor should not, however, be assigned a fixed current rating without considering the installation conditions.

Professional cable selection should consider:

• Design current
• Connected load
• Cable length
• Voltage drop
• Installation method
• Ambient temperature
• Cable grouping
• Protective-device coordination
• Short-circuit withstand requirements
• Earthing arrangement
• Applicable electrical standards

600/1000V XLPE Armoured Power Cable

The C.Divine cable is specified for 600/1000V, also commonly expressed as 0.6/1kV.

The conductors are insulated with XLPE — Cross-Linked Polyethylene.

XLPE is widely used for power-cable insulation because of its electrical insulation and thermal characteristics. IEC 60502-1 covers power cables with extruded insulation for rated voltages up to and including 1kV for fixed installations, including distribution networks and industrial installations.

The XLPE insulation forms a protective electrical barrier around each copper conductor.

For professional installations, the cable should always be operated within the manufacturer’s stated voltage, temperature, current, and environmental limits.

XLPE/SWA/PVC Cable Construction

The principal materials in this cable can be summarized as:

CU Copper Conductor → XLPE Insulation → SWA Steel Wire Armour → PVC Outer Sheath

Depending on the exact manufacturer’s construction, intermediate bedding or filler layers may also be present between the insulated cores and armour.

Copper Conductor

Carries the electrical current through the cable.

XLPE Insulation

Provides electrical insulation around each conductor.

SWA Armour

Provides additional mechanical protection around the insulated cable assembly.

PVC Outer Sheath

Provides the external protective covering.

This multi-layer construction is commonly used for fixed low-voltage power-distribution cables.

Steel Wire Armour – SWA Protection

SWA means Steel Wire Armour.

The steel armour provides additional mechanical protection around the insulated cores.

This is one of the primary advantages of an armoured power cable compared with an ordinary unarmoured cable.

SWA cables can be considered for installations where cables may be exposed to mechanical stress, including suitable:

• Industrial installations
• Construction projects
• Commercial buildings
• Factories
• Warehouses
• Generator installations
• Residential estates
• Outdoor fixed installations
• Cable trenches
• Suitable underground installations
• Industrial machinery
• Electrical infrastructure

The actual suitability depends on the cable’s specific construction and installation conditions.

PVC Outer Sheath

The PVC outer sheath provides the external protective layer of the cable.

It helps protect the internal cable components during transportation, handling, installation, and normal service conditions for which the cable is designed.

PVC is commonly used as a cable sheath material because it provides a durable external covering for many electrical applications.

The overall construction therefore provides:

Electrical insulation + mechanical protection + external protection.

Applications of 50mm² X 4Core Armoured Cable

The C.Divine 50mm² X 4Core Armoured Cable can be considered for numerous electrical applications where the complete cable specification meets the project requirements.

Industrial Power Distribution

Suitable for consideration in industrial facilities such as factories, workshops, manufacturing plants, warehouses, and production facilities.

Commercial Buildings

It can be used for suitable fixed power-distribution circuits in commercial buildings, offices, hotels, restaurants, shopping facilities, and business premises.

Generator Power Distribution

The cable may be used for suitable generator distribution systems where the generator output, design current, cable length, voltage drop, installation method, and protection system are compatible.

Construction Projects

Electrical contractors can use appropriately specified 50mm² SWA cable for permanent power-distribution infrastructure in construction projects.

Residential Estates

Large residential estates, apartment complexes, and housing developments may require larger armoured cables for selected distribution systems.

Outdoor Electrical Systems

The armoured construction can provide useful mechanical protection for suitable outdoor fixed electrical installations.

Industrial Machinery

The cable can be considered for selected fixed power connections to industrial machinery and equipment when the equipment’s electrical requirements match the cable specification.

50mm² 4Core Armoured Cable Sizes

C.Divine armoured power cables are available in different conductor sizes for various electrical applications.

Armoured Cable Size	Core Configuration	Voltage Rating	Conductor	Construction
4mm² X 4Core	4 Core	600/1000V	Copper	XLPE/SWA/PVC
6mm² X 4Core	4 Core	600/1000V	Copper	XLPE/SWA/PVC
25mm² X 4Core	4 Core	600/1000V	Copper	XLPE/SWA/PVC
35mm² X 4Core	4 Core	600/1000V	Copper	XLPE/SWA/PVC
50mm² X 4Core	4 Core	600/1000V	Copper	XLPE/SWA/PVC
70mm² X 4Core	4 Core	600/1000V	Copper	XLPE/SWA/PVC
95mm² X 4Core	4 Core	600/1000V	Copper	XLPE/SWA/PVC
120mm² X 4Core	4 Core	600/1000V	Copper	XLPE/SWA/PVC

Note: This table identifies the requested cable sizes. Actual current-carrying capacity must be confirmed from the manufacturer’s technical data and calculated according to the installation conditions.

Why Choose C.Divine 50mm² X 4Core Armoured Cable?

1. Large 50mm² Copper Conductors

The 50mm² conductor size provides a larger cross-sectional area for applications where engineering calculations require a larger conductor.

2. Four-Core Construction

Four individually insulated conductors make the cable suitable for appropriate multi-conductor power-distribution systems.

3. XLPE Insulation

XLPE provides electrical insulation around each copper conductor.

4. Steel Wire Armour

SWA provides additional mechanical protection around the cable.

5. PVC Outer Sheath

The PVC outer sheath provides external protection for the armoured cable assembly.

6. 600/1000V Specification

The cable is designed for suitable low-voltage power systems within its stated voltage rating.

7. Suitable for Commercial and Industrial Projects

Its robust construction makes it suitable for consideration in appropriately designed industrial, commercial, construction, generator, estate, and infrastructure applications.

50mm² X 4Core SWA Cable for Nigerian Electrical Projects

Electrical installations throughout Nigeria require different cable sizes depending on the connected load and installation conditions.

The 50mm² X 4Core Armoured Cable is positioned for applications requiring a larger four-core copper conductor than smaller 4mm², 6mm², 25mm², and 35mm² options.

It can be considered for projects in:

• Lagos
• Abuja
• Port Harcourt
• Ibadan
• Kano
• Benin City
• Enugu
• Kaduna
• Warri
• Other Nigerian cities

For customers in Lagos searching for 50mm² 4Core SWA Armoured Cable, it is important to purchase from a reliable electrical cable supplier and verify the complete product specification before installation.

Where to Buy 50mm² 4Core Armoured Cable in Lagos

Customers searching online for:

• 50mm² X 4Core Armoured Cable Lagos
• 50mm² 4 Core SWA Cable Nigeria
• 50mm² XLPE Copper Cable
• 50mm² PVC SWA Cable
• 50mm² Copper Armoured Cable
• 600/1000V Armoured Cable Lagos
• 4 Core Armoured Power Cable Nigeria
• SWA Cable Supplier Lagos
• Original Armoured Cable Nigeria
• Industrial Electrical Cable Lagos
• C.Divine Armoured Cable

should verify the cable construction and technical specification before purchasing.

When buying 50mm² armoured cable, confirm:

• Copper conductor
• 50mm² conductor size
• Four-core configuration
• 600/1000V rating
• XLPE insulation
• Steel Wire Armour
• PVC outer sheath
• Applicable product standard
• Manufacturer documentation
• Cable length
• Cable accessories
• Installation requirements

50mm² SWA Cable for Generator Installation

Generators are widely used across Nigeria for homes, offices, businesses, factories, hotels, hospitals, construction sites, warehouses, and industrial facilities.

A 50mm² X 4Core armoured cable may be appropriate for certain generator power-distribution systems, but it must be correctly sized for the generator and connected loads.

Before using the cable, consider:

Generator Capacity

The generator’s kVA/kW rating and operating voltage determine its electrical output requirements.

Full-Load Current

The design current should be compared with the cable’s applicable current-carrying capacity.

Cable Length

Long cable runs may produce significant voltage drop and require additional engineering consideration.

Installation Method

Cable capacity changes depending on whether the cable is installed underground, in ducts, on cable trays, in free air, or by another method.

Ambient Temperature

High ambient temperatures can affect cable current-carrying capacity.

Protective Devices

The breaker and other protective devices should be properly coordinated with the cable and load.

Earthing

The electrical system and SWA armour should be incorporated into the appropriate earthing arrangement.

50mm² 4Core Armoured Cable for Industrial Applications

Industrial facilities can require robust power-distribution cables for fixed installations.

The C.Divine 50mm² X 4Core armoured cable combines a relatively large copper conductor size with XLPE insulation, steel wire armour, and PVC outer protection.

Potential applications include:

• Factory power distribution
• Manufacturing facilities
• Industrial workshops
• Warehouse power systems
• Pumping systems
• Machinery connections
• Distribution boards
• Industrial control systems
• Commercial production facilities
• Electrical infrastructure

The cable should be selected based on the actual electrical design and manufacturer’s technical data.

Professional Installation of 50mm² SWA Cable

Installation should be carried out by a qualified electrician or competent electrical professional.

Important installation considerations include:

SWA Cable Glands

Use cable glands compatible with the cable’s diameter, armour construction, and installation environment.

Cable Lugs

Select suitable lugs for 50mm² copper conductors and the equipment terminals.

Armour Earthing

The armour should be incorporated into the appropriate earthing and bonding arrangement.

Cable Support

Provide suitable support to prevent excessive mechanical stress.

Bending Radius

Observe the manufacturer’s specified minimum bending radius during installation.

Circuit Protection

Protective devices should be appropriately coordinated with the cable and connected load.

Testing

The completed installation should be inspected and electrically tested before commissioning.

50mm² vs 35mm² 4Core Armoured Cable

A 50mm² conductor is larger than a 35mm² conductor.

However, the 50mm² cable is not automatically the correct choice for every installation.

The appropriate cable size depends on:

• Design current
• Cable length
• Voltage drop
• Installation method
• Ambient temperature
• Cable grouping
• Fault-current requirements
• Protective-device coordination
• Applicable electrical standards

A qualified electrical professional should determine whether 35mm², 50mm², 70mm², or another conductor size is appropriate.

50mm² vs 70mm² 4Core Armoured Cable

The 70mm² conductor is larger than 50mm².

For larger electrical loads, longer cable runs, or installations with more demanding voltage-drop requirements, a larger conductor may be necessary.

However, cable selection should be based on engineering calculations rather than simply choosing the largest available size.

Benefits of XLPE/SWA/PVC Power Cable

Copper Conductors

Copper offers good electrical conductivity for power-distribution applications.

XLPE Insulation

XLPE provides robust electrical insulation around the conductors.

Steel Wire Armour

SWA provides additional mechanical protection.

PVC Outer Sheath

PVC provides an external protective covering.

Four-Core Design

Four cores provide flexibility for suitable multi-conductor power-distribution systems.

Robust Construction

The multi-layer construction is suitable for many fixed electrical installations when correctly specified.

Frequently Asked Questions

What is 50mm² X 4Core armoured cable?

It is a four-core armoured power cable with a nominal 50mm² conductor cross-sectional area per core. The C.Divine product is specified with copper conductors, XLPE insulation, SWA protection, and PVC outer sheath.

What is the voltage rating?

The product is specified as 600/1000V.

Is the conductor copper?

Yes. The product is specified as a CU copper conductor cable.

What does SWA mean?

SWA means Steel Wire Armour, which provides additional mechanical protection around the cable.

What does XLPE mean?

XLPE stands for Cross-Linked Polyethylene, an insulation material commonly used in power cables.

What does PVC mean?

PVC stands for Polyvinyl Chloride, commonly used as cable bedding and/or outer sheath material.

What does 4Core mean?

4Core means the cable contains four individual insulated conductors.

Is 50mm² suitable for industrial applications?

It can be suitable for industrial applications where engineering calculations confirm that the 50mm² four-core cable meets the required current, voltage-drop, installation, and fault-current requirements.

Can 50mm² SWA cable be used outdoors?

It can be suitable for appropriate outdoor fixed installations when the cable’s environmental rating and installation method meet the project’s requirements.

Can 50mm² SWA cable be installed underground?

Armoured cables can be used for suitable underground installations. The installation must consider burial conditions, mechanical protection, environmental exposure, cable rating, routing, and applicable standards.

Can 50mm² 4Core SWA cable be used for generators?

It may be suitable for generator power distribution where cable-sizing calculations confirm compatibility with the generator output, connected load, cable length, installation method, voltage drop, and protection system.

Is 50mm² better than 35mm²?

Not necessarily. The appropriate conductor size depends on the electrical design. A larger cable should only be selected when the engineering requirements justify it.

Where can I buy 50mm² X 4Core Armoured Cable in Lagos?

Customers searching for 50mm² X 4Core Armoured Cable in Lagos Nigeria can contact C.Divine electrical cable suppliers to confirm current availability, technical specifications, pricing, cable length, and delivery options.

Order 50mm² X 4Core Armoured Cable – C.Divine

The 50mm² X 4Core Armoured Cable 600/1000V XLPE SWA PVC CU Power Cable – C.Divine is a robust four-core copper power cable designed for suitable fixed electrical installations requiring a larger conductor size and additional mechanical protection.

Its construction combines 50mm² copper conductors, XLPE insulation, Steel Wire Armour, and PVC outer protection, providing a durable cable solution for appropriately designed industrial, commercial, construction, generator, estate, outdoor, and electrical power-distribution applications.

If you are searching online for 50mm² 4 Core Armoured Cable in Lagos, 50mm² SWA Cable Nigeria, 50mm² XLPE Copper Cable, 600/1000V Armoured Power Cable, or original electrical cables and electrical materials in Nigeria, C.Divine is a suitable product option to consider.

Before purchase and installation, confirm the manufacturer’s technical specification, applicable product standard, cable construction, conductor material, cable length, and certification or test documentation for the specific product.

Cable sizing, installation, termination, earthing, protection, and testing should be performed by a qualified electrical professional according to the project’s requirements and applicable electrical standards.